Dell 2209WA Monitor - Manual (Page 28)

Back to Contents Page
Setting Up the Monitor
Dell™ 2209WA Flat Panel Monitor User's Guide
Attaching the Stand
Connecting the Monitor
Organizing Your Cables
Attaching the Soundbar (optional)
Removing the Stand
Attaching the Stand
To attach the monitor stand:
1. Remove the cover and place the monitor on it.
2. Fit the two tabs on the upper part of the stand to the groove on the back of the monitor.
3. Press the stand till it snaps into its place.
Connecting Your Monitor
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
Connect the blue (VGA) cable from your monitor to your computer.
NOTE: The stand is detached when the monitor is shipped from the factory.
WARNING: Before you begin any of the procedures in this section, follow the Safety Instructions .