Dell 2209WA Monitor - Manual (Page 29)

2. Connect either the white (digital DVI-D) or the blue (analog VGA) display connector cable to the corresponding video port on the back of your
computer. Do not use both cables on the same computer.
Use both the cables only when they are connected to two different computers with
appropriate video systems.
Connecting the white DVI cable
Connecting the blue VGA cable
Connecting the USB cable
After you have completed connecting the DVI/VGA cable, follow the procedure below to connect the USB cable to the computer and complete your monitor
setup:
1. Connect the upstream USB port (cable supplied) to an appropriate USB port on your computer.
2. Connect USB peripherals to the downstream USB ports (side or bottom) on the monitor. (See side or bottom view for details.)
3. Plug the power cables for your computer and monitor into a nearby outlet.
4. Turn on the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an image, see
Solving Problems.
5. Use the cable slot on the monitor stand to organize the cables.
Organizing Your Cables
NOTE: If your computer supports a white DVI connector, unscrew and detach the blue (VGA) cable from the monitor
and then connect the White DVI cable to the monitor and the white DVI connector on your computer.
NOTE: Do not connect both the blue VGA and the White DVI cables to the computer at the same time. All monitors ship with the
VGA(blue) cable attached by default.
NOTE: The Graphics are used for the purpose of illustration only. Appearance of the computer may vary.