Dell XPS 13 (L322X, Early 2013) - Manual (Page 15)

4
Power-Light Board
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
For additional safety best practices information, see the Regulatory Compliance
Homepage at dell.com/regulatory_compliance.
Prerequisites
1 Remove the base cover. See "Removing the Base Cover" on page 13.
Removing the Power-Light Board
1 Lift the connector latch and pull the pull-tab to disconnect the
power-light board cable from the connector on the I/O board.
2 Remove the screw that secures the power-light board to the
palm-rest assembly.
3 Lift the power-light board off the palm-rest assembly.
2
3
1
1 screw 2 power-light board cable
3 power-light board
Power-Light Board 15