Removing the palm-rest assembly, Replacing the palm-rest assembly – Dell XPS 13 (L322X, Early 2013) User Manual
Page 64
Removing the Palm-Rest Assembly
1 Remove the screws that secure the display assembly to the
palm-rest assembly.
2 Gently lift the palm-rest assembly to a 90-degree angle and then release
the palm-rest assembly off the display assembly.
CAUTION:
Carefully separate the palm-rest assembly from the display assembly
to avoid damage to the display assembly.
1
1
palm-rest assembly
2
screws (4)
3
display hinges (2)
2
3
Replacing the Palm-Rest Assembly
1 Slide and place the palm-rest assembly over the display assembly.
2 Press down on the display hinges and ensure the screw holes in the display
hinges align with the screw holes on the palm-rest assembly.
3 Replace the screws that secure the palm-rest assembly to the display assembly.
Palm-Rest Assembly
64