Table 11, Port pause (where <i> is in the range 0…7), Table 12 – Dell Mellanox Family of Adapters User Manual
Page 53
User Manual for Mellanox ConnectX®-3 10/40 Gigabit Ethernet Adapters for Dell PowerEdge Servers
Rev 1.1
Mellanox Technologies
53
rx_novlan_bytes
Total bytes in successfully received packets with no VLAN pri-
ority.
tx_prio_<i>_packets
Total packets successfully transmitted with priority i.
tx_prio_<i>_bytes
Total bytes in successfully transmitted packets with priority i.
tx_novlan_packets
Total packets successfully transmitted with no VLAN priority.
tx_novlan_bytes
Total bytes in successfully transmitted packets with no VLAN
priority.
Table 11 - Port Pause (where <i> is in the range 0…7)
Counter
Description
rx_pause_prio_<i>
The total number of PAUSE frames received from the far-end
port
rx_pause_duration_prio_<i
>
The total time in microseconds that far-end port was requested to
pause transmission of packets.
rx_pause_transition_prio_<i
>
The number of receiver transitions from XON state (paused) to
XOFF state (non-paused)
tx_pause_prio_<i>
The total number of PAUSE frames sent to the far-end port
tx_pause_duration_prio_<i>
The total time in microseconds that transmission of packets has
been paused
tx_pause_transition_prio_<i
>
The number of transmitter transitions from XON state (paused)
to XOFF state (non-paused)
Table 12 - VPort Statistics (where <i>=<empty_string> is the PF, and ranges 1…NumOfVf per VF)
Counter
Description
vport<i>_rx_unicast_packet
s
Unicast packets received successfully
vport<i>_rx_unicast_bytes
Unicast packet bytes received successfully
vport<i>_rx_multicast_pack
ets
Multicast packets received successfully
vport<i>_rx_multicast_byte
s
Multicast packet bytes received successfully
Table 10 - Port VLAN Priority Tagging (where <i> is in the range 0…7)
Counter
Description