Turning on the system, Installing the optional bezel, Completing the system setup – Dell Powervault DL2300 User Manual
Page 5
Turning On The System
Figure 5. Turning on the System
Press the power button on the system. The power indicator should light.
Installing The Optional Bezel
Figure 6. Installing the Bezel
Install the bezel (optional).
Completing The System Setup
To complete the system setup, follow the instructions in the
Setting Up Your Dell PowerVault DL Backup to Disk
Appliance
placemat that shipped with your system. To reinstall an operating system, see the installation and
configuration documentation for the operating system. Be sure the operating system is installed before installing
hardware or software not purchased with the system.
NOTE: See the
Dell PowerVault Backup to Disk Appliance Powered by CommVault Simpana Release Notes
at
support.dell.com/manuals for the latest information.
5