Dell Studio Hybrid D140G (Mid 2008) - Manual (Page 11)

9
Setting Up Your Studio Hybrid
Connect Using the DVI Connector
Connect the display using a DVI cable (which
usually has white connectors at both ends).
If your display already has a VGA cable (with
blue connectors at both ends) connected to
your display, disconnect the VGA cable and
use a DVI cable.
If your display only has a VGA connector, use
a VGA cable with the VGA‑to‑DVI adapter
(not included with your computer).
Connect Using an HDMI Connector
Connect the display using an HDMI cable.
NOTE: You can purchase additional VGA‑
to‑DVI adapters, as well as DVI and HDMI
cables from the Dell website at dell.com.