Dell Studio Hybrid D140G (Mid 2008) - Manual (Page 7)

5
Setting Up Your Studio Hybrid
This section provides information about setting
up your Studio Hybrid 140g and connecting
peripherals.
Before Setting Up Your Computer
When positioning your computer, ensure that
you allow easy access to a power source,
adequate ventilation, and a level surface to
place your computer.
Restricting airflow around your Studio
Hybrid may cause it to overheat. To prevent
overheating ensure that you leave at least
10.2 cm (4 in) at the back of the computer and a
minimum of 5.1 cm (2 in) on all other sides. You
should never put your computer in an enclosed
space, such as a cabinet or drawer when it is
powered on.
NOTICE: Placing or stacking heavy or sharp
objects on the computer may result in
permanent damage to the computer.
Install the Stand
You have the option of setting up your computer
either in a vertical or horizontal position.
Your computer automatically rotates the
illuminated name and symbols to display
correctly in either orientation. While powered
on, the Dell ™ logos on either side of the
computer illuminate when the computer is
vertical, and only on the top surface when it is
horizontal.