Dell PowerEdge C8000 - Manual (Page 68)

68
FILE LOCATION: D:\Projects\User Guide\Server\Dell\OOB\HOM\C8220-C8220X
BMC\BMC\C8220-C8220X_BMC_HOM_section1.fm
Table 1-53. Configuration ID = 05h, Account Status
Attribute ID Size Description R/W
Number of User 1 1 Number of user created, including enabled and
disabled users. The count does not include USER
ID1. Default value is 01h.
R
Number of
Enabled User
2 1 Number of enabled users. This count does not
include USER ID1. Default value is 01h.
R
User Name 3 1..
17
Specify the user name in P-String format.
Indexed by user ID.
R
Account Status 4 1 Status of the account. This is the supplement to
the byte 3 of response data of Get User Access
command. Indexed by user ID.
• 00h: Status is unspecified.
• 01h: User ID is enabled via Set User Password.
• 02h: User ID is disabled via Set User Passwor.d
• 03h: User ID is lockout.
R
Table 1-54. Configuration ID = 06h, DNS
Attribute ID Size Description R/W
DNS DHCP
Enable
1 1 Specifies that the DNS server IP addresses should
be assigned from the DHCP server.
• 0: FALSE (default)
• 1: TRUE
R/W
DNS Server1 2 4 Specifies the IP address for DNS server 1. When
the DNS DHCP Enable and DHCP are enabled
this parameter is read-only. Default value is
00000000h.
R/W
DNS Server2 3 4 Specifies the IP address for DNS server 2. When
the DNS DHCP Enable and DHCP are enabled
this parameter is read-only. Default value is
00000000h.
R/W