Dell PowerEdge C8000 User Manual
Page 74
74
FILE LOCATION: D:\Projects\User Guide\Server\Dell\OOB\HOM\C8220-C8220X
BMC\BMC\C8220-C8220X_BMC_HOM_section1.fm
Table 1-59. Configuration ID = 11h, Power Management
Attribute
ID Size Description
R/W
Power
Staggering AC
Recovery
2
1
This parameter is only effective if the Power Policy
is not set to always off.
• 0x00: Immediate Power On (No Delay) (default)
• 0x01: Auto (Random), the auto generated delay
time must be in the range of Minimum Power On
Delay and Maximum Power On Delay.
• 0x02: User Defined, the user defined delay time
must be in the range of Minimum Power On
Delay and Maximum Power On Delay.
R/W
Power On Delay 3
2
Define the time to delay power on the system after
AC recovered and BMC firmware ready.
Default value is 00h.
R/W
Minimum
Power On Delay
4
2
Specify the minimum power on delay in seconds,
when AC is restored and BMC firmware ready.
This does not include the BMC firmware setup
time.
Default value is the time in seconds for BMC
firmware to boot and ready to accept and perform
Power On command.
R
Maximum
Power On Delay
5
2
Specify the maximum power on delay in seconds,
when AC is restored. The number must be greater
than Minimum Power On Delay.
Default value is the Minimum Power On Delay
+1 second.
R/W