Installing a pc card or an expresscard – Dell Latitude D631 (Early 2009) User Manual
Page 35
Press the latch and remove the card or blank. For some latches, you must press the latch twice: once to pop the latch out, and then a second time to pop the
card out.
Save a blank to use when no PC Card is installed in a slot. Blanks protect unused slots from dust and other particles.
Installing a PC Card or an ExpressCard
You can install a PC Card or ExpressCard in the computer while the computer is running. The computer automatically detects the card.
PC Cards and ExpressCards are generally marked with a symbol (such as a triangle or an arrow) to indicate which end to insert into the slot. The cards are
keyed to prevent incorrect insertion. If card orientation is not clear, see the documentation that came with the card.
1.
Hold the card with its orientation symbol pointing into the slot and the top side of the card facing up. The latch may need to be in the in position before
you insert the card.
2.
Slide the card into the slot until the card is completely seated in its connector.
If you encounter too much resistance, do not force the card. Check the card orientation and try again.
The computer recognizes most PC Cards and automatically loads the appropriate device driver. If the configuration program tells you to load the
manufacturer's drivers, use the floppy disk or CD that came with the PC Card.
To install an ExpressCard:
1.
Place the ExpressCard in the PC Card adapter (the adapter is included with the ExpressCard).
2.
Install the ExpressCard with adapter the same way as a PC Card.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE:
Use the PC Card configuration utility (click the
icon in the taskbar) to select a card and stop it from functioning before you remove it from
the computer. If you do not stop the card in the configuration utility, you could lose data. Do not attempt to eject a card by pulling its cable, if one is
attached.
1
release button
2
PC Card
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
1
release button
2
PC Card