Dell UPS 1000T - Manual (Page 17)

17 Using the Utility |
Using the Utility
This chapter describes the Dell UPS Upgrade Software window and provides prerequisites for upgrading
the UPS using the Dell UPS Upgrade Software utility.
Exploring the Dell UPS Upgrade Software Window
Use the Dell UPS Upgrade Software window to perform the following:
S
Select upgrade settings and set upgrade preferences
S
Verify unique UPS and firmware file version identification data before you upgrade the UPS
S
Initiate the UPS firmware upgrade
NOTE: You must reconfigure upgrade settings each time you upgrade the UPS firmware.
The Dell UPS Upgrade Software window allows you to select upgrade settings. For example, use this
window to select the firmware version for the UPS upgrade. You can also direct the upgrade through
either the RS-232 or USB port, or use the Dell Network Management Card Ethernet interface to
upgrade the firmware (see Figure 12).
3