Dell UPS 1000T - Manual (Page 28)

28 |
Upgrading UPS Firmware
Figure 20. Upgrade Processing Error Message
14 Select Force Upgrade on the Dell UPS Upgrade Software window (see Figure 21).
NOTE: When you select Force Upgrade, only the program reference number is validated before the upgrade
begins.
Figure 21. Forcing the Upgrade
15 Click Upgrade to retry the UPS firmware upgrade.
16 Determine the upgrade completion status as follows:
S
If the UPS firmware upgrade is successful, a notification message displays (see Figure 19 on
page 27).
S
If retrying the UPS upgrade fails, contact Dell User Support at www.support.dell.com.