Dell PowerVault MD3260i - Manual (Page 76)

Creating Replicated Pairs
The Create Replicated Pair option allows for creating a replication pair relationship between a primary
Virtual Disks on the primary array and a secondary Virtual Disks on the secondary array. To create a new
Replicated pair, perform the following:
1. In the Asynchronous Replication Groups table, select an ARG (with primary role) in which to create a
Replicated pair.
2. Click Create Replicated Pair command.
The Create Asynchronous Replicated Pair dialog is displayed.
Figure 62. Create Asynchronous Replicated Pair Dialog
3. From the Select a primary Virtual Disks drop-down list, select the primary Virtual Disks for the
Replicated pair.
4. Click Next.
5. From the Select a secondary Virtual Disks disk drop-down list, select the secondary Virtual Disks for
the Replicated pair.
76