Dell Inspiron 11 (3147, Mid 2014) - Manual (Page 57)

Replacing the Display
Assembly
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer . After working inside your
computer, follow the instructions in After Working Inside Your
Computer . For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
CAUTION: Place the computer on a soft and clean surface to avoid
scratching the display.
1 Place the display assembly on the palmrest and keyboard assembly.
2 Align the screw holes on the display hinges with the screw holes on the
palmrest and keyboard assembly.
3 Replace the screws that secure the display assembly to the palmrest and
keyboard assembly.
4 Turn the computer over and close the display.
5 Slide the Windows button-board connector into the connector latch on
the system board and press down the latch to secure the cable.
6 Adhere the tape to the Windows button-board cable.
7
Connect the display cable to the system board.
8 Align the screw holes on the display-cable bracket with the screw holes
on the system board.
9 Replace the screws that secure the display-cable bracket to the system
board.
10 Connect the antenna cables to the wireless card.
Post-requisites
1 Replace the battery .
2 Replace the base cover .
57