Replacing the display cable, Procedure, Post-requisites – Dell Inspiron 11 (3147, Mid 2014) User Manual
Page 76
Replacing the Display Cable
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
Before Working Inside Your Computer
computer, follow the instructions in
. For more safety best practices, see the Regulatory
Compliance home page at dell.com/regulatory_compliance.
Procedure
1
Route the display cable through the routing guides on the display bezel.
2 Slide the display cable into the connector on the touch board and press
down the latch to secure the cable.
3 Slide the Windows-button board cable into the connector on the
Windows-button board and press down the latch to secure the cable.
4 Adhere the adhesive tape on the Windows-button board connector.
Post-requisites
1
Replace the
display back-cover and antenna assembly
.
2 Replace the
3 Replace the
4 Replace the
.
5 Replace the
76