Dell XPS 200 - Manual (Page 60)

60
Removing and Installing Parts
1 2 4
9
8
3 5
6
7
10 11 12 13
1 link integrity light • Green — A good connection exists between a 10-Mbps network and the
computer.
• Orange — A good connection exists between a 100-Mbps network and the
computer.
• Off — The computer is not detecting a physical connection to the network.
2 network adapter
connector To attach your computer to a network or broadband device, connect one end of a
network cable to either a network jack or your network or broadband device. Connect
the other end of the network cable to the network adapter connector on the back
panel of your computer. A click indicates that the network cable has been securely
attached.
NOTE:
Do not plug a telephone cable into the network connector.
On computers with a network connector card, use the connector on the card.
It is recommended that you use Category 5 wiring and connectors for your network.
If you must use Category 3 wiring, force the network speed to 10 Mbps to ensure
reliable operation.
3 network activity light Flashes a yellow light when the computer is transmitting or receiving network data. A
high volume of network traffic may make this light appear to be in a steady "on"
state.
4 modem connector Use the modem connector to connect your computer to the Internet.
5 surround sound
connector Use the black surround sound connector to attach multichannel-capable speakers.
6 line-in connector Use the blue line-in connector to attach a record/playback device such as a cassette
player, CD player, or VCR.
On computers with a sound card, use the connector on the card.