Dell XPS 200 - Manual (Page 81)

Removing and Installing Parts
81
4 Check all cable connections, and fold cables out of the way to provide airflow for the fan and
cooling vents.
5 Replace the computer cover (see page 93).
6 Connect your computer and devices to their electrical outlets, and turn them on.
7 See the documentation that came with the drive for instructions on installing any software
required for drive operation.
8 Enter system setup (see page 99) and select the appropriate Drive option.
Verify that your computer works correctly by running the Dell Diagnostics (see page 48).
Media Card Reader
For information about using the Media Card Reader, see "Using a Media Card Reader (Optional)"
on page 14.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
NOTICE:
To prevent static damage to components inside your computer, discharge static electricity
from your body before you touch any of your computer’s electronic components. You can do so by
touching an unpainted metal surface on the computer chassis.