Previous menu, Activate network access, Unconfigure network access – Dell Latitude E6320 (Early 2011) User Manual
Page 43
Under the Wireless LAN IPv6 Configuration select Previous Menu and press <Enter>.
The TCP/IP Settings menu appears.
Previous Menu
Under the TCP/IP Setting menu select Previous Menu and press <Enter>.
The Intel ME Network Setup menu appears.
Previous Menu
Under the Intel ME Network Setup menu select Previous Menu and press <Enter>.
The AMT Configuration menu appears.
Activate Network Access
Under the Intel AMT Configuration page select Activate Network Access and press <Enter>.
Press 'Y' to activate or press 'N' to cancel.
Activate Network Access causes the Intel ME to transition to the POST provisioning state if all required settings are
configured. Without Activating Network Access, ME will not be able to connect to the network.
NOTE:
Power policy will change to PP2 after activating if the default power policy is set to PP1.
Unconfigure Network Access
Under the Intel ME Platform Configuration menu select Unconfigure Network Access and press <Enter>.
NOTE:
This will cause Intel ME to transition to the PRE provisioning state.