Installing the i/o board, Removing the switch board – Dell Precision M4700 (Mid 2012) User Manual
Page 39
Advertising
Installing the I/O Board
1.
Connect the I/O board connector and slide the I/O board into its slot in the computer.
2.
Tighten the screw to secure the I/O board to the computer.
3.
Connect the ExpressCard module connector to the I/O board.
4.
Install the:
a. palmrest
b. hard drive
c. optical drive
d. keyboard
e. keyboard trim
f. base cover
g. battery
h. SD card
5.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Switch Board
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a. battery
b. base cover
c. keyboard trim
d. keyboard
e. optical drive
f. hard drive
39
Advertising