Installing the display panel, Removing the camera, Installing the camera – Dell Precision M4700 (Mid 2012) User Manual
Page 55
Installing the Display Panel
1.
Align the display brackets to the display panel.
2.
Tighten the screws to secure the display brackets to the display panel.
3.
Connect the LVDS cable and affix the adhesive tape.
4.
Align the display panel in its original position on the computer.
5.
Tighten the screws to secure the display panel to the display assembly.
6.
Install the:
a. display bezel
b. battery
7.
Follow the procedures in
After Working Inside Your Computer
.
Removing the Camera
1.
Follow the procedures in
Before Working Inside Your Computer
.
2.
Remove the:
a. battery
b. display bezel
3.
Disconnect the camera cable. Remove the screw that secures the camera module to the computer. Remove the
camera module from the computer.
Installing the Camera
1.
Place the camera module in its slot on the computer.
2.
Tighten the screw to secure the camera module to the computer.
3.
Connect the camera cable.
4.
Install the:
a. display bezel
b. battery
5.
Follow the procedures in
After Working Inside Your Computer
.
55