Outback Power Systems MATE2 - Manual (Page 87)


ADV/MATE/AGS/TIMERS ---------
lsstart timer 0 min
DOWN UP
ADV/MATE/AGS/TIMERS---------
lsstop timer 0 min
DOWN UP
ADV/MATE/AGS/TIMERS---------
vdcstop timer 0 min
DOWN UP
ADV/MATE/AGS/TIMERS---------
exstop timer 0 min
DOWN UP
ADV/MATE/AGS/TIMERS ----------
end of TIMERS
menu
UP TOP AGS
This screen displays the load start delay timer
which is adjustable up to 240 minutes, counting
down. The user determines how many minutes
the AC loads must remain above the load start
kw set point before starting the generator. Press
the <DOWN> soft key to view the next TIMERS
screen.
The lsstop timer screen counts down the time the
AC load must remain below the load stop kw be-
fore the generator stops. Press the <DOWN> soft
key to view the vdcstop timer screen.
The vdcstop timer counts down the amount of
time a DC generator is allowed to run. Press
the <DOWN> soft key to view the last TIMERS
screen.
The exstop timer screen displays the amount of
time the generator runs during an exercise period
(1-240 minutes). Press the <DOWN> soft key to
open the end of TIMERS screen.
This is the final TIMERS screen. Press the <AGS>
soft key to view the final AGS screen.