Dell Broadcom NetXtreme Family of Adapters - Manual (Page 169)

Linux Management Application Installation: Broadcom NetXtreme BCM57XX User Guide
file:///C|/Users/Nalina_N_S/Documents/NetXtreme/English/lnx_bacs.htm[9/5/2014 3:32:23 PM]
Installing WS-MAN or CIM-XML on Linux Server
Step 1: Install OpenPegasus
On the Red Hat Linux OS, two installation options are available:
From the Inbox RPM (Red Hat Only)
From Source (Red Hat and SuSE)
On the SUSE Linux Enterprise Server 11 (SLES11) OS, you must use the source RPM.
NOTE: The Inbox RPM does not support the WS-MAN communication protocol. To use WS-MAN, you must install
OpenPegasus from source.
From the Inbox RPM (Red Hat Only)
In Red Hat Linux, an Inbox OpenPegasus RPM is available as tog-pegasus-<version>.<arch>.rpm.
1. Use the following command to install tog-pegasus:
rpm -ivh tog-openpegasus-<version>.<arch>.rpm
2. Use the following command to start Pegasus:
/etc/init.d/tog -pegasus start
NOTE: On SuSE Linux, the Inbox OpenPegasus RPM is not available. OpenPegasus must be installed form source, as
described in the following procedure.
Note that in inbox Pegasus, HTTP is not enabled by default. After Inbox OpenPegasus is installed successfully, if no further
configuration is required, then follow the instructions in
Step 4: Install Broadcom CMPI Provider . To enable HTTP, see Enable
HTTP .
From Source (Red Hat and SuSE)
The OpenPegasus source can be downloaded from www.openpegasus.org .
NOTE: If not already installed, download and install the openssl and libopenssl-devel rpm. This step is optional and
required only if you are planning to use HTTPS to connect the client to the managed host.
Set the Environment Variables
Set the environment variables for building OpenPegasus as follows.
Environment Variable Description
PEGASUS_ROOT The location of the Pegasus source tree
PEGASUS_HOME
The location for the built executable, repository; e.g.,
$PEGASUS_HOME/bin, PEGASUS_HOME/lib, $PEGAUS_HOME/repository,
and $PEGASUS_HOME/mof subdirectories.
PATH $PATH:$PEGASUS_HOME/bin
PEGASUS_ENABLE_CMPI_PROVIDER_MANAGER True
PEGASUS_CIM_SCHEMA
"CIM222"
PEGASUS_PLATFORM
For Linux 32 bit systems: "LINUX_IX86_GNU"
For Linux 64 bit systems: "LINUX_X86_64_GNU"
PEGASUS_HAS_SSL Optional. Set to "true" for HTTPS support.
PEGASUS_ENABLE_PROTOCOL_WSMAN Optional. Set to "true" for WSMAN protocol support.
Additional Settings
The $PEGASUS_HOME variable must be set up in the shell environment, and $PEGASUS_HOME/bin needs to be appended to