Replacing the optical drive – Dell Studio 1745 (Mid 2009) User Manual
Page 43
Replacing the Optical Drive
1.
Follow the procedures in
Before You Begin
.
2.
Connect the interposer to the optical drive.
3.
Align the connector on the optical drive with the connector on the system board and press the optical drive until it is fully seated.
4.
Replace the three screws that secure the optical drive to the computer base.
5.
Replace the media card reader board (see
Replacing the Media Card Reader Board
).
6.
Replace the palm rest (see
Replacing the Palm Rest
).
7.
Replace the media controls board (see
Replacing the Media Controls Board
).
8.
Replace the keyboard (see
Replacing the Keyboard
).
9.
Replace the center control cover (see
Replacing the Center Control Cover
).
10.
Replace the battery (see
Replacing the Battery
).
Back to Contents Page
1
interposer