Dell Vostro 430 (Late 2009) - Manual (Page 34)

Back to Contents Page
Power Supply
Dell™ Vostro™ 430 Service Manual
Removing the Power Supply
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove the Cover .
3. Disconnect power cables from all the internal devices including the system board, hard drives, and optical drives.
4. Remove the cables from the routing clips (if any) on the chassis.
WARNING: Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.