Replacing the status-light board – Dell Alienware M14x (Early 2011) User Manual
Page 30
Replacing the Status-Light Board
1.
Follow the instructions in
Before You Begin
.
2.
Align the slot on the status-light board with the alignment post on the palm rest assembly.
3.
Replace the screw that secures the status-light board to the palm-rest assembly.
4.
Route the status-light board cable through the routing guides on the palm- rest assembly.
5.
Replace the palm-rest assembly (see
Replacing the Palm-Rest Assembly
).
6.
Replace the keyboard (see
Replacing the Keyboard
).
7.
Replace the center-control cover (see
Replacing the Center-Control Cover
).
8.
Replace the battery pack (see
Replacing the Battery Pack
).
9.
Replace the base cover (see
Replacing the Base Cover
).
Back to Contents Page
1
status-light board
2
screw
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.