Dell Inspiron 15 (M5030, Mid 2010) User Manual
Page 27
2.
Align the notch in the memory module with the tab in the memory-module connector.
3.
Slide the memory module firmly into the connector at a 45-degree angle, and press the memory module down until it clicks into place. If you do not hear
the click, remove the memory module and reinstall it.
4.
Replace the keyboard (see
Replacing the Keyboard
).
5.
Replace the battery (see
Replacing the Battery
).
6.
Turn on the computer.
As the computer boots, it detects the memory module(s) and automatically updates the system configuration information.
To confirm the amount of memory installed in the computer:
Windows
®
7:
Click Start
®
Control Panel®
System and Security®
System.
Windows Vista
®
:
Click Start
®
Help and Support®
Dell System Information.
Back to Contents Page
NOTE:
If the memory module is not installed properly, the computer may not boot.
1
tab
2
notch
CAUTION:
Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may
result in damage to the computer.