Coin-cell battery, Removing the coin-cell battery, Replacing the coin-cell battery – Dell Inspiron 15 (M5030, Mid 2010) User Manual

Page 9

Advertising
background image

Back to Contents Page

 

Coin-Cell Battery

Dell™ Inspiron™ N5020/M5030/N5030 Service Manual 

  

Removing the Coin-Cell Battery

  

Replacing the Coin-Cell Battery

 

 

 

 

Removing the Coin-Cell Battery

 

1.

Follow the instructions in

Before You Begin

.


 

2.

Remove the battery (see

Removing the Battery

).


 

3.

Remove the keyboard (see

Removing the Keyboard

).


 

4.

Remove the palm rest (see

Removing the Palm Rest

).


 

5.

Using a plastic scribe, pry the coin-cell battery from the slot on the system board.


 

Replacing the Coin-Cell Battery

 

1.

Follow the instructions in

Before You Begin

.


 

2.

Hold the coin-cell battery with the positive side facing up.

 

3.

Slide the coin-cell battery into the slot and press it gently until it snaps into place.

 

4.

Replace the palm rest (see

Replacing the Palm Rest

).


 

5.

Replace the keyboard (see

Replacing the Keyboard

).


 

6.

Replace the battery (see

Replacing the Battery

).

 

Back to Contents Page

 

WARNING:

Before working inside your computer, read the safety information that shipped with your computer. For additional safety best

practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.

CAUTION:

Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™ 

is not covered by your warranty.

CAUTION:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal

surface (such as a connector on your computer).

CAUTION:

To help prevent damage to the system board, remove the main battery (see

Removing the Battery

) before working inside the

computer.

1

plastic scribe

2

coin-cell battery

CAUTION:

Before turning on the computer, replace all screws and ensure that no stray screws remain inside the computer. Failure to do so may

result in damage to the computer.

Advertising