Dell IN1930 Monitor - Manual (Page 5)

Monitor Specifications
The following sections give you information about the various power management modes and pin assignments for the various connectors of your monitor.
Power Management Modes
If you have VESA's DPM compliance display card or software installed in your PC, the monitor automatically reduces its power consumption when not in use. This is referred to as
from keyboard, mouse, or other input devices, the monitor automatically resumes functioning. The following table shows the power consumption and signaling of this automatic power saving feature:
IN1930:
IN2030M:
The OSD will only function in the normal operation mode. When any button except power button is pressed in Active-off mode, the following messages will be displayed:
Activate the computer and monitor to gain access to the OSD .
* Zero power consumption in OFF mode can only be achieved by disconnecting the main cable from the monitor.
** Maximum power consumption with max luminance and contrast.
Pin Assignments
Label Description Use
1 AC power connector To connect the monitor power cable.
2 VGA connector To connect your computer to the monitor using a VGA cable.
Label Description Use
1 AC power connector To connect the monitor power cable.
2 DVI connector To connect your computer to the monitor using a DVI cable.
3 VGA connector To connect your computer to the monitor using a VGA cable.
VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption
Normal operation Active Active Active White 22 W (Maximum)
18 W (Typical)
Active-off mode Inactive Inactive Blank Amber Less than 1 W
Switch off - - - Off Less than 0.5 W
VESA Modes Horizontal Sync Vertical Sync Video Power Indicator Power Consumption
Normal operation Active Active Active White 25 W (Maximum)
20 W (Typical)
Active-off mode Inactive Inactive Blank Amber Less than 1 W
Switch off - - - Off Less than 0.5 W
NOTE: Dell IN1930/IN2030M monitor is ENERGY STAR®-compliance.