Dell PowerEdge C6220 II - Manual (Page 126)

126 | Using the System Setup Program
Token Setup option Description
025F Mirror Mode Memory Operating Mode set to support Memory
mirroring.
0260 Advanced ECC
Mode Memory Operating Mode set to support Advanced ECC,
i.e. Lockstep, Chipkill.
026A Coherent HT
Link Speed Sets to support HyperTransport 1 specification.
026B Coherent HT
Link Speed Sets to support HyperTransport 3 specification.
026E Active
Processor Cores This field controls the number of enabled all of cores in
each processor. By default, the maximum number of cores
per processor will be enabled.
026F
Active
Processor Cores This field controls the number of enabled 6 cores in each
processor. By default, the maximum number of cores per
processor will be enabled.
0270 Active
Processor Cores This field controls the number of enabled 8 cores in each
processor. By default, the maximum number of cores per
processor will be enabled.
0271 Active
Processor Cores This field controls the number of enabled 10 cores in each
processor. By default, the maximum number of cores per
processor will be enabled.
0272 Active
Processor Cores This field controls the number of enabled 12 cores in each
processor. By default, the maximum number of cores per
processor will be enabled.
027B HT Assist Allows user the ability to disable the Probe Filter
chipset option from BIOS setup. There are some
applications that may have lower performance with
the chipset feature enabled.
027C HT Assist Allows user the ability to enable the Probe Filter chipset
option from BIOS setup. There are some applications that
may have lower performance with the chipset feature
disabled.
02A1 C1E State The C1-E is enabled by default.
02A2
C1E State
The C1-E is disabled by user in their own liability. There
will be warning message in both the BIOS Setup help text
and the pop up message when the option is changing.