Dell PowerEdge C6220 II - Manual (Page 13)

1
About Your System | 13
About Your System
Accessing System Features during Startup
The following keystrokes provide access to system features during startup.
Note that the hot-keys of SAS/SATA card or PXE support are available in
BIOS boot mode only. There is no hot-key to boot through the UEFI mode.
Keystroke Description
<F2> Enters the System Setup program. See “Start Menu” on page 68.
<F11> Enters the BIOS Boot Manager. See “Boot Manager” on page 69.
<F12> Starts Preboot eXecution Environment (PXE) / iSCSI boot.
<Ctrl><C> Enters the LSI 9210-8i HBA Card or LSI 2008 SAS Mezzanine
Card Configuration Utility. For more information, see the SAS
adapter documentation.
<Ctrl><H> Enters the LSI 9265-8i Card Configuration Utility. For more
information, see the documentation for your SAS RAID card.
<Ctrl><Y> Enters the MegaPCLI SAS RAID Management Tool.
<Ctrl><S> Enters the utility to configure onboard LAN settings for PXE
boot. For more information, see the documentation for your
integrated LAN.
<Ctrl><I> Enters onboard SATA Controller’s Configuration Utility.
<Ctrl><D> Enter the Intel iSCSI setup menu.