Dell P2310H Monitor User Manual
Page 22
Display
Settings
Use the Display Settings to adjust image.
Wide Mode
Adjust the image ratio as 4:3 or full screen.
Horizontal P
osition
Use the
or
to adjust image left or right. Minimum is '0' (-). Maximum is '100' (+).
Vertical Pos
ition
Use the
or
to adjust image up or down. Minimum is '0' (-). Maximum is '100' (+).
Sharpness
This feature can make the image look sharper or softer. Use
or
to adjust the sharpness from '0' to '100'.
Pixel Clock
T
he Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.
Use the
or
to adjust for best image quality.
Phase
If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase
(fine) again.
NOTE:
Pixel Clock and Phase Adjustments are only available for "VGA" input.
Reset
Display
Settings
Select this option to restore default display settings.
Other
Settings
Select this option to adjust the settings of the OSD, such as, the languages of the OSD, the amount of time the menu remains on
screen, and so on.
Language
Language option to set the OSD display to one of eight languages (English, Espanol, Francais, Deutsch, Brazilian Portuguese,
Russian, Simplified chinese or Japanese).
Menu Trans
parency
Select this option to change the menu transparency by pressing 1st or 2nd buttons (Minimum: 0 ~ Maximum: 100).
Menu Timer OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.
Use the
or
to adjust the slider in 5 second increments, from 5 to 60 seconds.
Menu Lock
Controls user access to adjustments. When Lock is selected, no user adjustments are allowed. All buttons are locked.
NOTE:
When the OSD is locked, pressing the menu button takes the user directly to the OSD settings menu, with OSD Lock
selected. Select "Unlock" to unlock and allow user access to all applicable settings.
Menu
Rotation
Rotates the OSD by 90 degrees counter-clockwise. Your can adjust the menu according to your
.
Power Save
Audio
To turn on or off Audio Power during Power Save mode.
DDC/CI
DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable
via software on your computer. You can disable this feature by selecting "Disable".
Enable this feature for best user experience and optimum performance of your monitor.