Dell Latitude E6430s (Mid 2012) - Manual (Page 54)

Installing the Display-Hinge Walls
1. Place both the display-hinge walls on the panel.
2. Insert the antenna cables into their opening on the right display-hinge wall and secure them using the adhesive
tape to the display assembly.
3. Tighten the screws to secure the display-hinge walls to secure them to the display assembly.
4. Install:
a) power LED board
b) display panel
c) display bezel
d) display assembly
e) display hinge covers
f) media board
g) palmrest
h) bluetooth module
i) keyboard
j) keyboard trim
k) base cover
l) optical drive
m) hard drive
n) battery
o) ExpressCard
p) SD card
5. Follow the procedures in After Working Inside Your Computer .
Removing the Display Hinges
1. Follow the procedures in Before Working Inside Your Computer .
2. Remove:
a) SD card
b) ExpressCard
c) battery
d) hard drive
e) optical drive
f) base cover
g) keyboard trim
h) keyboard
i) bluetooth module
j) palmrest
k) media board
l) display hinge covers
m) display assembly
n) display bezel
o) display panel
p) power LED board
54