Dell Latitude E6430s (Mid 2012) - Manual (Page 55)

3. Remove the screw that secures the left display hinge to the display assembly.
4. Remove the left display hinge wall out of the display assembly.
5. Repeat steps 3 and 4 to remove the right display hinge.
Installing the Display Hinges
1. Place both the display hinges on the panel.
2. Tighten the screws to secure the display hinges.
3. Install:
a) power LED board
b) display panel
c) display bezel
d) display assembly
e) display hinge covers
f) media board
g) palmrest
h) bluetooth module
i) keyboard
j) keyboard trim
k) base cover
l) optical drive
m) hard drive
n) battery
o) ExpressCard
p) SD card
4. Follow the procedures in After Working Inside Your Computer .
55