Compaq 60002MC10 - Manual (Page 20)

Installation
Page 3-10
J3
Š ŠŠ Š Š Power On/Off
(This is connected to the power button on the
case. Using the Soft-Off by Pwr-BTTN feature,
you can choose either Instant Off (turns
system off immediately), or 4 sec delay (you
need to push the button down for 4 seconds
before the system turns off). When the system
is in 4 sec delay mode, suspend mode is
enabled by pushing the button momentarily.)
Š ŠŠ Š Š Turbo LED indicator
LED ON when higher speed is selected
Š ŠŠ Š Š IDE LED indicator
LED ON when Onboard PCI IDE Hard disks is
activate
Š ŠŠ Š Š IR Connector
1. VCC 4. GND
2. NC 5. IRTX
3. IRRX
Š ŠŠ Š Š Power LED
Power LED connector
1. Power LED(+) 4. NC
2. N/C 5. GND
3. GND
Š ŠŠ Š Š Speaker
Connect to the system's speaker for beeping
1. Speaker 3. GND
2. N/C 4. GND
Š ŠŠ Š Š Reset
Closed to restart system.
J2