Compaq 60002MC10 - Manual (Page 32)

BIOS
Page 4-11
4-4 Power Management Setup
Choose the “POWER MANAGEMENT SETUP” in the CMOS SETUP UTILITY to
display the following screen. This menu allows the user to modify the power
management parameters and IRQ signals. In general, these parameters should not
be changed unless it’s absolutely necessary.
Figure 5: Power Management Setup
ACPI Function: This option allows you to select ACPI Function.
The default is Enabled.
Enabled: Support ACPI function for new O.S
Disabled: No Support ACPI function.You can only change the content of Doze
Mode, Standby Mode, and Suspend Mode when the Power Management
is set to ‘User Define’.
Power Management: Use this to select your Power Management selection.
The default is User define.
Disabled:
The system operates in NORMAL conditions (Non-GREEN), and
the Power Management function is disabled.
Max. saving: Maximum power savings. Inactivity period is 1 minute in each
mode.