Dell UPS 1920R - Manual (Page 17)

Dell UPS Management Software: Common Software Installation Scenarios
17
To configure the Dell UPS:
Click on the Dell UPS node in the “Node Settings” menu.
This configuration process enables you to manage other parameters of the Dell UPS, such as:
 Network settings, such as IP address (for versions 4 and 6), SNMP and SMTP alert server settings
 System settings (language, log intervals, UPS name/contact)
 Access control (login credentials, security mode, remote firmware upload acceptance)
 Shutdown schedule (for example, shut down on weekends or weekdays after 5:30pm and turn
back on by 9am the following day)
 Time settings
 Power outlet control
 Email alerts
 Environmental thresholds and alerting (with the optional Environmental Monitoring Probe (EMP)
Figure 18: MUMC node configuration
Scenario 3: Redundant UPS, multiple servers, Network
(Ethernet) Management Card (NMC) connection
In this scenario:
 Server 1 is powered by Dell UPS #1 and Dell UPS #2. Server is connected by USB to Dell UPS #1.
 Server 2 is powered by Dell UPS #1 and Dell UPS #2. Server is connected by USB to Dell UPS #2.
 Server 3 connects to Dell UPS #1, Server 4 is connected to Dell UPS #2.