Dell PowerVault 725N (Rackmount NAS Appliance) User Manual
Page 9
Upgrading Your 39160 SC SI Card Firmware
1-7
6
Create a new user with the name pv725 and the password set to password:
a
From the desktop of your client system, right-click My Computer, and then select
Manage.
b
On the left side of the Computer Management window, double-click Local Users
and Groups.
c
Right-click Users and select New User.
d
In the New User window, type pv725 as the user name.
e
Type password in Password, and type it again in Confirm password.
f
Click User must change password at next logon to clear the check box.
g
Click Create, and then click Close.
7
Create a share for the SCSI firmware on the client system:
a
If not already logged in, log in to the client system with an account that has
administrator privileges.
b
Download the new SCSI firmware and utilities from support.dell.com and place
them in a directory on your client system.
Ensure that both 39160.rom and flash4.exe are downloaded into this directory.
c
Double-click My Computer and browse to the directory where you downloaded
the firmware.
d
Right-click this directory, and select Sharing.
e
Click Share this folder.
f
Type SCSI for the name of the share, and then click OK to confirm the share
settings.
8
Install the Dell Reinstallation Console from the Resource CD:
a
Insert the Resource CD into the CD drive of your client system.
The Dell PowerVault 725N Resource CD screen displays in a browser window.
NOTE: If the CD does not run automatically, double-click the start.bat file on the CD.
b
Click Resources.
c
Click Install Reinstallation Console.
d
When the File Download window displays, click Open this file from its current
location, and then click OK.
e
Click Next and follow the instructions on the screen.
f
When prompted to reboot the client system, click Yes.