Display: dell xps m1710 service manual, Display, Removing the display assembly – Dell XPS M1710 (MXG061, Early 2006) User Manual

Page 42: Display assembly

Advertising
background image

Display: Dell XPS M1710 Service Manual

file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/display.htm[2/21/2014 11:23:47 AM]

Back to Contents Page

Display

Dell™ XPS™ M1710 Service Manual

Display Assembly

Display Bezel

Display Panel

Display Latch

Display Assembly

Removing the Display Assembly

CAUTION:

Before you begin the following procedure, follow the safety instructions in the Product

Information Guide.

NOTICE:

To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching

an unpainted metal surface (such as the back panel) on the computer.

NOTICE:

To help prevent damage to the system board, remove the main battery (see

Before Working Inside Your

Computer

) before working inside the computer.

1. Follow the instructions in

Before Working Inside Your Computer

.

2. Turn the computer upside down and loosen the two captive screws on the Mini-Card cover.

NOTE:

You must detach the Mini-Card antennas (see

step 3

) before you can remove the display assembly. If a Mini-

Card is installed, disconnect the antenna cables from the card. If one is not installed, detach the antenna cables from

their secured location.

3. Disconnect the antenna cables from the Mini-Card, if applicable.

Advertising