Dell XPS M1710 (MXG061, Early 2006) - Manual (Page 6)

USB Port Board: Dell XPS M1710 Service Manual
file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/usbport.htm[2/21/2014 11:23:26 AM]
Back to Contents Page
USB Port Board
Dell™ XPS™ M1710 Service Manual
Removing the USB Port Board
Replacing the USB Port Board
Removing the USB Port Board
CAUTION: Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
NOTICE: To help prevent damage to the system board, remove the main battery (see Before Working Inside Your
Computer ) before working inside the computer.
1. Follow the instructions in Before Working Inside Your Computer .
2. Remove the hinge cover (see Removing the Hinge Cover ).
3. Remove the keyboard (see Keyboard ).
4. Remove the display assembly (see Removing the Display Assembly ).
5. Remove the palm rest (see Removing the Palm Rest ).
6. Disconnect the USB-port-board cable connector from the system board.
7. Remove the M2.5 x 5-mm screw, and lift the board out of the computer.