Connecting your monitor – Dell IN1940MW Display User Manual
Page 20
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section, follow the
.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
Connect the blue (VGA) cable from your monitor to your computer.
NOTE: If your computer supports a DVI connector, connect the white DVI cable (optional) from your monitor to your computer.
NOTE: Do not connect both the VGA and the DVI cables to the computer as all monitors ship with the VGA cable attached to the
monitor.
2. Connect either the white (digital DVI-D) or the blue (analog VGA) display cable to the corresponding video port of your computer. Do not use both cables on the same
computer. Use both the cables only when they are connected to two different computers with appropriate video systems.