Dell E2414H Monitor - Manual (Page 17)

32  Operating the Monitor Operating the Monitor  33
ENERGY
SETTINGS
Power Button
LED Allows you to set the power LED indicator on or off
to save energy.
Reset Energy
Settings Select this option to restore default Energy Settings.
DISPLAY
SETTINGS Use the Display Settings to adjust image.
Wide Mode Adjust the image ratio to Wide 16:9, 4:3, 5:4.
Horizontal
Position
Use the and buttons to adjust image left and
right. Minimum is ‘0’ (-). Maximum is ‘100’ (+).
NOTE: When using a DVI source, the Horizontal
Position setting is not available.
Vertical
Position
Use the and buttons to adjust image up and
down. Minimum is ‘0’ (-). Maximum is ‘100’ (+).
NOTE: When using a DVI source, the Vertical
Position setting is not available.
Sharpness This feature can make the image look sharper or
softer. Use
or to adjust the sharpness from
‘0’ to ‘100’.
Pixel Clock The Phase and Pixel Clock adjustments allow you to
adjust your monitor to your preference.
Use the and buttons to adjust for best image
quality.
Phase If satisfactory results are not obtained using the
Phase adjustment, use the Pixel Clock (coarse)
adjustment and then use Phase (fine), again.
NOTE: Pixel Clock and Phase Adjustments are only
available for “VGA” input.
Reset Display
Settings
Select this option to restore default display settings.