Osd warning messages – Dell E2414H Monitor User Manual
Page 19
36
Operating the Monitor
Operating the Monitor
37
OSD Warning Messages
When the monitor does not support a particular resolution mode you will
see the following message:
LCD
Conditioning
Helps reduce minor cases of image retention.
Depending on the degree of image retention, the
program may take some time to run. You can enable
this feature by selecting “Enable”.
Reset Other
Settings
Select this option to restore default other settings,
such as DDC/CI.
Factory
Reset
Reset all OSD settings to the factory preset values.
Personalize
User can select from “Preset Modes”, “Brightness/
Contrast”, “Auto Adjust”, “Input Source”, “Aspect Ratio” and
set as shortcut key.
Reset
Personalization
Allows you to restore shortcut key to the default setting.
This means that the monitor cannot synchronize with the signal that it is
receiving from the computer. See
for the Horizontal
and Vertical frequency ranges addressable by this monitor. Recommended
mode is 1920 x 1080.
You will see the following message before the DDC/CI function is disabled.
When monitor enters Power Save mode, the following message appears:
Activate the computer and wake up the monitor to gain access to the