Dell Inspiron 3800 - Manual (Page 46)

46 Solving Problems
www
.dell.com | support.dell.com
16 When the Completing the Windows 2000 Setup Wizard window
appears, remove the CD from the drive, and then click Finish. The
computer automatically restarts.
NOTICE: Make sure that you reinstall the Intel
®
Chip Set Update Utility
driver before you reinstall any other drivers.
HINT: Windows 2000
recreates the hibernate
file automatically, but you
must reenable it.
17 Reenable the hibernate file (see page 48).
Recreating the Hibernate File
(Windows 98 Only)
HINT: Windows Me and
Windows 2000 recreate
the hibernate file
automatically.
When hibernate mode is activated, all system data is stored in the hibernate
file on your hard drive. The hibernate file cannot be accessed by the
Windows operating system or application programs.
HINT: If you install
additional memory, you
must delete the original
hibernate file before
recreating a new one.
You must recreate the hibernate file if you perform any of the following
actions:
• Delete the hibernate file.
• Install a new hard drive.
• Reformat your hard drive.
• Install additional memory.
Boot (Restart) Your Computer With the System Software CD
1 Save and close any open files, exit any open programs, and shut down
the computer.
2 If the computer is connected (docked) to an advanced port replicator
(APR), undock it (see page 54).
3 Turn on the computer.
4 Press <F2> as soon as you see the Dell logo.
System setup screen Page 1 appears after a few seconds.
5 Press <Alt><p> to view Page 2.