Dell Dimension 4700 - Manual (Page 13)

Setting Up and Using Your Computer
13
4 Turn on the printer and then turn on the computer. If the Add New Hardware Wizard
window appears, click Cancel.
5 Install the printer driver if necessary. See the documentation that came with your printer.
Connecting Two Monitors
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions
located in the Product Information Guide.
NOTE:
If you are connecting two monitors that have VGA connectors, you must have the optional DVI
adapter. If you are connecting two flat-panel monitors, at least one of them must have a VGA connector.
If you are connecting a television, you may connect only one monitor (VGA or DVI) in addition to the
television.
If you purchased a graphics card that supports dual monitors, follow these instructions to connect
and enable your monitors. The instructions tell you how to connect either two monitors (each with
a VGA connector), one monitor with a VGA connector and one monitor with a DVI connector, or a
television.
Connecting Two Monitors With VGA Connectors
1 Follow the procedures in "Before You Begin" on page 47.
NOTE:
If your computer has integrated video, do not connect either monitor to the integrated video
connector. If the integrated video connector is covered by a cap, do not remove the cap to connect the
monitor. The monitor will not function.
parallel printer cable
parallel connector on computer
connector on printer
screws (2)
clips (2)
notches (2)