Video and monitor problems, No sound from headphones, If the screen is blank – Dell Dimension 4700 User Manual

Page 34

Advertising
background image

34

Solving Problems

www

.dell.com | support.dell.com

No sound from headphones

Video and Monitor Problems

CAUTION:

Before you begin any of the procedures in this section, follow the safety instructions

located in the Product Information Guide.

NOTE:

See the monitor documentation for troubleshooting procedures.

If the screen is blank

R

UN

THE

SPEAKER

DIAGNOSTICS

R

EINSTALL

THE

SOUND

DRIVER

See page 43.

R

UN

THE

H

ARDWARE

T

ROUBLESHOOTER

See page 46.

C

HECK

THE

HEADPHONE

CABLE

CONNECTION

Ensure that the headphone cable is securely inserted

into the headphone connector (see page 49).

A

DJUST

THE

W

INDOWS

VOLUME

CONTROL

Click or double-click the speaker icon in the lower-right

corner of your screen. Ensure that the volume is turned up and that the sound is not muted.

C

ONNECT

THE

MONITOR

TO

THE

CORRECT

VIDEO

CONNECTOR

If the integrated video connector on

your computer is covered by a cap, do not remove the cap to connect the monitor, or the monitor will
not function. Connect your monitor to the video connector on the graphics card..

C

HECK

THE

MONITOR

CABLE

CONNECTION

• Ensure that the graphics cable is connected as shown on the setup diagram for your computer.
• If you are using a graphics extension cable and removing the cable solves the problem, the cable is

defective.

• Swap the computer and monitor power cables to determine if the power cable is defective.
• Check the connector for bent or broken pins. (It is normal for monitor cable connectors to have missing

pins.)

C

HECK

THE

MONITOR

POWER

LIGHT

If the power light is off, firmly press the button to ensure that

the monitor is turned on. If the power light is lit or blinking, the monitor has power. If the power light is
blinking, press a key on the keyboard or move the mouse.

Advertising