Removing the base cover, Prerequisites, Procedure – Dell Inspiron 17R (Early 2013) User Manual
Page 20
20
| Removing
the
Base
Cover
Removing the Base Cover
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
After working inside your computer, follow the instructions in "After Working
Inside Your Computer" on page 11. For additional safety best practices information,
see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
Prerequisites
Remove the battery. See "Removing the Battery" on page 12.
Procedure
1
Loosen the captive screws that secure the base cover to the computer base.
2
Using your fingertips, lift the base cover out of the slots on the computer base.
1
captive screws (2)
2
base cover
1
2
book.book Page 20 Friday, December 14, 2012 3:32 PM