Dell Inspiron 17R (Early 2013) - Manual (Page 59)

Replacing the Display Assembly | 59
Replacing the Display Assembly
WARNING: Before working inside your computer, read the safety information that
shipped with your computer and follow the steps in "Before You Begin" on page 9.
After working inside your computer, follow the instructions in "After Working
Inside Your Computer" on page 11. For additional safety best practices information,
see the Regulatory Compliance Homepage at dell.com/regulatory_compliance.
Procedure
1 Place the display assembly on the computer base and align the screw holes on the
display assembly with the screw holes on the computer base.
2 Replace the screws that secure the display assembly to the computer base.
3 Route the antenna cable through the routing guides on the computer base.
Postrequisites
1 Follow the instructions from step 3 to step 10 in "Replacing the System Board" on
page 43.
2 Replace the palm-rest. See "Replacing the Palm-Rest" on page 33.
3 Replace the keyboard. See "Replacing the Keyboard" on page 19.
4 Replace the base cover. See "Replacing the Base Cover" on page 21.
5 Follow the instructions from step 3 to step 4 in "Replacing the Optical Drive" on
page 16.
6 Follow the instructions from step 3 to step 5 in "Replacing the Hard Drive" on
page 27.
7 Replace the battery. See "Replacing the Battery" on page 13.
book.book Page 59 Friday, December 14, 2012 3:32 PM