Dell Projector 3300MP - Manual (Page 38)

Card Reader Module - Note: this menu is only available when the card reader is installed. (Card Reader is an optional accessory that can be
purchased from Dell website)
Card Reader Module
Render Mode
Use Render Mode function to change Normal, Pre-view or Slide Show mode, select Change to go into the sub-menu.
Mode Rotation (Available in Normal mode only)
Use Mode Rotation to rotate the projection image.
Transition Mode (Available at Normal, Pre-view and Slide Show modes)
Use Transition Mode to setup the preferred transition pattern for the image.
Slide Time (Available at Normal, Pre-view and Slide Show modes)
Adjust the slide time interval during Slide Show.
Display Mode (Available at Normal mode only)
l Select True to display the photo image in native resolution.
l Select Full to scale the photo image to full screen.
Photo Information (Available at Normal, Pre-view and Slide Show modes)
l Select Yes to show the photo information on the screen.
l Select No to hide the photo information.
Delete Photo (Available at Normal mode only)
Select Yes to delete the photo image projected on the screen.
Color (Available at Normal, Pre-view and Slide Show modes)
l Select On to display the photo image in color mode.
l Select Off to display the photo image in black-and-white mode.
Diagnostic
l Select On to run the Diagnostic test on the card reader.
l Select Off to exit the test.
Note: Please refer to the installation guide of the card reader for details.
Factory Reset Menu