Dell E1715S Monitor - Manual (Page 25)

Setting Up the Monitor

25
Connecting Your Monitor
WARNING: Before you begin any of the procedures in this section,
follow the Safety Instructions.
To connect your monitor to the computer:
1. Turn off your computer and disconnect the power cable.
2. Connect either the black (digital DP) or the blue (analog VGA) display
connector cable to the corresponding video port on the back of your
computer. Do not use both cables at the same time. Use both the
cables only when they are connected to two different computers with
appropriate video systems.
Connecting the blue VGA Cable
Connecting the black DP cable
Note: The graphics are used for the purpose of illustration only.
Appearance on the computer may vary.